published date : mar 21, 2008 drawing no : sdsa2762 v3 checked : b .l.liu p.1/4 part number: LUS65W t-1 (3mm) solid state lamp www.sunled.com part number emitting color emitting material lens-color luminous intensity (if=10ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. LUS65W orange gaasp/gap water clear 18 49 607 50 notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. specifications are subjec t to change without notice. features z low power consumption. z popular t-1 diameter package. z general purpose leads. z reliable and rugged. z long life - solid state reliability. z available on tape and reel. z rohs compliant. absolute maximum ratings (t a =25c ) us (gaasp/gap) unit reverse voltage v r 5 v forward current i f 25 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 145 ma power dissipation p t 62.5 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 lead solder temperature [2mm below package base] 260c for 3 seconds lead solder temperature [5mm below package base] 260c for 5 seconds us (gaasp/gap) unit forward voltage (typ.) (i f =10ma) v f 1.95 v forward voltage (max.) (i f =10ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =10ma) p 607 nm wavelength of dominant emission (typ.) (i f =10ma) d 610 nm spectral line full width at half-maximum (typ.) (i f =10ma) ? 35 nm capacitance (typ.) (v f =0v, f=1mhz) c 15 pf operating characteristics (t a =25c )
published date : mar 21, 2008 drawing no : sdsa2762 v3 checked : b .l.liu p.2/4 part number: LUS65W t-1 (3mm) solid state lamp www.sunled.com ? us
published date : mar 21, 2008 drawing no : sdsa2762 v3 checked : b .l.liu p.3/4 part number: LUS65W t-1 (3mm) solid state lamp www.sunled.com remarks: if special sorting is required (e.g. binn ing based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
published date : mar 21, 2008 drawing no : sdsa2762 v3 checked : b .l.liu p.4/4 part number: LUS65W t-1 (3mm) solid state lamp www.sunled.com packing & label specifications LUS65W
|
